The AH 1100电容标准机箱包含1-4支AH11A硅熔合电容标准。机内的精密温度控制确保了其性能非常稳定。它提供了足够的精度去校准AH2500A，2550A及2700A.电容值可以从0.1pF-115pF任意选购。
大些的电容年稳定度优于0.3ppm
AH 1100/11A SPECIFICATIONS
Range of capacitance values that can be ordered: Any value from 0.1 pF to 115 pF.
Accuracy of initial setting: 2 + 1/C ppm at 1 kHz where “C” is the value of the 11A in pF.
Stability in ppm per year: 0.3 + 1/C ppm/year
Temperature coefficient relative to a change in ambient temperature: 0.01 ppm/°C
Hysteresis from temperature cycling: 0.05 ppm
Hysteresis from mechanical shock: 0.05 ppm
AC voltage coefficient: 0.003 ppm/volt rms at 1 kHz
DC voltage coefficient: 0.0001 ppm/volt
Sensitivity to power line voltage changes: 0.0003 ppm per 1% change in power line voltage
Dissipation factor: less than 0.000 003 tan delta
Maximum allowable applied voltage: 250 volts peak
Warm up time from power-on: 30 minutes
Operating temperature range: 10° to 40° C
Storage temperature range: -40° to +75° C
Humidity: 0 to 85% relative humidity, non-condensing
Power requirements: 40 watts max. during power-on, 20 watts after power-on
Power frequency: 48 to 440 Hz
Power voltage ranges: 85 to 115, 102 to 138, 187 to 253 and 204 to 276 volts rms
AH 1100 packaging: The AH 1100 frame is 3.5 inches （8.9 cm） high and 15 inches （38.1 cm） deep behind the front panel. Hardware for rack mounting and a bail for bench top use are provided.
Weight of AH 1100 only: 15 pounds （7 kg）
AH 11A packaging: 4.45 wide by 8.0 long by 2.0 inches high （11.3 wide by 20.3 long by 5.1 cm high）.
AH 11A weight: 1.5 pounds （0.7 kg）
Safety: Designed in accordance with UL1244, IEC348, and BS4743
Radiated emissions: Designed to meet FCC and VDE class A requirements
Warranty: The AH 1100 and AH 11A are covered by a three year warranty. Forward and return shipping is covered during the first three months of the warranty period.
Note: Specifications are subject to change without notice.
如果您对本产品感兴趣，请与我们
北京东方安诺生化科技有限公司
: -8012谢
:
Emai: farley668
：www.annovatech。。ｃｏｍ
所有评论仅代表网友意见，与本站立场无关。