广告招募

当前位置:全球贸易网 > 技术中心 > 所有分类

糙面土工膜毛糙高度测定仪有哪些常见问题及解决方法?

2023年02月03日 12:20:14      来源:河北天辰仪器设备有限公司 >> 进入该公司展台      阅读量:22

分享:

糙面土工膜毛糙高度测定仪有哪些常见问题及解决方法?,糙面土工膜毛糙高度测定仪,土工布动态穿孔测定仪,土工合成材料耐静水压测定仪,土工合成材料抗渗仪,土工合成材料渗透系数测定仪,土工布磨损试验仪

据技术部6月22日上午09点02分透露:(/c149978/products/d.html)


YI、TCGB-20型糙面土工膜毛糙高度测定仪简介:
TCGB-20型糙面土工膜毛糙高度测定仪是依据GB/T17643标准设计制造,主要适用于糙面土工膜及其相关产品的厚度测量,具有使用方便,测量精度高等优点。
Brief introduction of tcgb-20 measuring instrument for roughness height of rough geomembrane
Tcgb-20 rough geomembrane height measuring instrument is designed and manufactured according to GB / t17643 standard. It is mainly suitable for thickness measurement of rough geomembrane and its related products. It has the advantages of convenient use and high measurement accuracy.

二、TCGB-20型糙面土工膜毛糙高度测定仪原理:
TCGB-20型糙面土工膜毛糙高度测定仪主要适用于糙面土工膜试样上用深度计测量膜面凸出处(峰)与凹陷处(谷)表面之间的高度差,对样品在宽度方向上所有youxiao点的测量值取平均值作为糙面土工膜的毛糙高度。
Principle of tcgb-20 measuring instrument for roughness height of rough surface geomembrane:
Tcgb-20 measuring instrument for roughness height of rough geomembrane is mainly used for measuring the height difference between the convex (peak) and concave (Valley) surface of the rough geomembrane sample with a depth meter. The average value of all effective points in the width direction of the sample is taken as the roughness height of the rough geomembrane.

三、TCGB-20型糙面土工膜毛糙高度测定仪技术参数:
1、测量量程:0-12mm
2、测量精度:0.01mm
3、同轴压力:0.56N+0.05
4、外形尺寸:160x140x200mm
5、重量:1.5kg
Technical parameters of tcgb-20 measuring instrument for roughness height of rough surface geomembrane:
1. Measuring range: 0-12mm
2. Measurement accuracy: 0.01mm
3. Coaxial pressure: 0.56n + 0.05
4. Overall dimension: 160x140x200mm
5. Weight: 1.5kg
 
四、TCGB-20型糙面土工膜毛糙高度测定仪试验步骤:
1、按GB/T 2918规定的23℃±2标准环境进行,状态调节时间不少于4h,并在该条件下进行试验。
2、测量将深度计的指示器归零。
3、将深度计测针置于糙面土工膜样品的表面凹点并保持稳定。
4、在刻度盘指示器上读数和记录,jingzhun到0.01mm。
5、将深度计放置在下一个位置,重复测量过程。
6、沿样品宽度方向按等间隔确定测量的位置点,至少测30点,始末两个测量点距样品边缘应不小于50mm。
 
五、TCGB-20型糙面土工膜毛糙高度测定仪试验报告:
对刻度盘指示器上直接读出的所有数据取平均值为毛糙高度值。
毛糙高度值的报告应包含以下信息:
1、糙面土工膜试验的规格、类型和取样方式;
2、试验仪器的名称或描述;
3、测量点尺寸;
4、试验样品尺寸;
5、测量数据数量;
6、所有测量值的平均值;
7、样品测量值的偏差,%。
 
六、注意事项:使用完毕清理表面,以备下次使用。

主营产品:土工检测仪器,防水材料检测仪器,陶瓷砖检测仪器,水利水电粗粒土系列,沥青仪器检测仪器
Main products: geotechnical testing instrument, waterproof material testing instrument, ceramic brick testing instrument, water conservancy and hydropower coarse-grained soil series, asphalt testing instrument

版权与免责声明:
1.凡本网注明"来源:全球贸易网"的所有作品,版权均属于兴旺宝装备总站,转载请必须注明兴旺宝装备总站。违反者本网将追究相关法律责任。
2.企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
3.本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。 4.如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系。