FLEXS-50R-美国MOUNTZ蒙士脉冲弯头气动扳手FLEXS-50R-深圳市伟烨鑫科技有限公司

详情介绍：

美国MOUNTZ蒙士脉冲弯头气动扳手FLEXS-50R

Various models that range from 7 - 51.6 lbf.ft
Designed to enhance cycle time with high-speed rundown.
Excellent power-to-weight ratio.
Safe ergonomic selection - low noise decibels, minimal vibration & reaction free operation.
Comfortable rubberized non-slip grips for easy handling and excellent thermal ergonomics.
Specially designed pulse fluid extends life between oil changes and provides better torque stability. Double sealing increases performance and reduces maintenance.
Shut-off and non shut-off models.
Ergonomically safer than harmful hammering and vibration of impact wrenches.
Pin Dentent included with square drive models.

美国MOUNTZ蒙士脉冲弯头气动扳手FLEXS-50R

Models	Item #	Drive Type	lbf.ft*	N.m*	Free Speed (RPM)*	Avg. Air Consumption m³/m CMM	Avg. Air Consumption ft³/min CFM	Hose Size in (mm)
FLEXS-50R	360145	1/4" F/Hex	7 - 11.8	9 - 16	4300	0.32	11.30	1/4" (6.5)
FLEXS-50R	360138	3/8" Sq. Dr	7.7 - 12.8	10.5 - 17	4300	0.32	11.30	1/4" (6.5)
FLEXS-60RX	360146	1/4" F/Hex	10 - 16.2	13.5 - 22	5300	0.40	14.10	3/8" (8)
FLEXS-60R	360139	3/8" Sq. Dr	11.1 - 17.7	15 - 24	5300	0.40	14.10	3/8" (8)
FLEXS-70RX	360147	1/4" F/Hex	14.8 - 21.4	20 - 29	4500	0.40	14.10	3/8" (8)
FLEXS-70R	360140	3/8" Sq. Dr	16.2 - 22.8	22 - 31	4500	0.40	14.10	3/8" (8)
FLEXS-70RG	360162	3/8" Sq. Dr	27.3 - 36.9	37 - 50	2000	0.40	14.10	3/8" (8)
FLEXS-70RH	360144	1/2" Sq. Dr	34 - 44.2	46 - 60	2200	0.40	14.10	3/8" (8)
FLEXS-80RH	360163	1/2" Sq. Dr	36.9 - 51.6	50 - 70	2800	0.45	15.90	3/8" (8)

Non Shut-Off Models (Torque Ranges)

Models	Item #	Drive Type	lbf.ft*	N.m*	Free Speed (RPM)*	Avg. Air Consumption m³/m CMM	Avg. Air Consumption ft³/min CFM	Hose Size in (mm)
FLEX-50RX	360148	1/4" F/Hex	7 - 11.8	9 - 16	4300	0.32	11.30	1/4" (6.5)
FLEX-50R	360141	3/8" Sq. Dr	7.7 - 12.8	10.5 - 17	4300	0.32	11.30	1/4" (6.5)
FLEX-60RX	360149	1/4" F/Hex	10 - 16.2	13.5 - 22	5300	0.40	14.10	3/8" (8)
FLEX-60R	360142	3/8" Sq. Dr	11.1 - 17.7	15 - 24	5300	0.40	14.10	3/8" (8)
FLEX-70RX	360150	1/4" F/Hex	14.8 - 21.4	20 - 29	4500	0.40	14.10	3/8" (8)
FLEX-70R	360143	3/8" Sq. Dr	16.2 - 22.8	22 - 31	4500	0.40	14.10	3/8" (8)
FLEX-70RG	360164	3/8" Sq. Dr	27.3 - 36.9	37 - 50	2000	0.40	14.10	3/8" (8)
FLEX-70RH	360151	1/2" Sq. Dr	34 - 44.2	46 - 60	2200	0.40	14.10	3/8" (8)
FLEX-80RH	360165	1/2" Sq. Dr	36.9 - 51.6	50 - 70	2800	0.45	15.90	3/8" (8)

Specifications

Models	Models	Wt Lbs.	Wt kgs	P/W Nm/kgs	Length in.	Noise Level dBa
FLEXS-50R	FLEX-50RX	2.6	1.2	13.3	10	80.0
FLEXS-50R	FLEX-50R	2.6	1.2	14.2	10	80.0
FLEXS-60RX	FLEX-60RX	2.9	1.3	16.9	10.4	80.0
FLEXS-60R	FLEX-60R	2.9	1.3	18.5	10.4	80.0
FLEXS-70RX	FLEX-70RX	3.1	1.4	20.7	10.7	80.0
FLEXS-70R	FLEX-70R	3.1	1.4	22.1	10.7	80.0
FLEXS-70RG	FLEX-70RG	3.5	1.6	31.3	11.1	82.0
FLEXS-70RH	FLEX-70RH	3.5	1.6	37.5	11.1	82.0
FLEXS-80RH	FLEX-80RH	3.7	1.7	41.2	11.1	82.0

Note! * Recommended air pressure is 85 PSI. Use a high quality air filter regulator and lubricator to ensure stable air pressure for optimal performance and for removal of moisture and other potential debris that can reduce the longevity and performance of pneumatic tools.

All specified torque ranges were established statically on a Mountz (TorqueLab LTT Series) torque meter at a dynamic air pressure of 85 PSI (Pounds per Square Inch). The specified results should be used as guidance only in tool selection. In general, the torque range will be lower based on type of joint, air pressure, extension bars and/or extended sockets. A pulse tool is a discontinuous tool and added adapters or extensions create a dampening effect, thus lowering torque values. Tool selection as well as set up is recommended to be validated on the actual joint by use of a suitable calibrated torque wrench. We recommend a quality Mountz digital torque wrench.

美国MOUNTZ蒙士脉冲弯头气动扳手FLEXS-50R